Advertisement
Available languages
Available languages
10
The Advanced MCACC menu
Checking MCACC Data
At the procedure of Automatically setting up for
surround sound (Auto MCACC) on page 40, the
procedure of Automatic MCACC (Expert) on
page 89 or after fine-adjusting at Manual
MCACC setup on page 92, you can check your
calibrated settings using the GUI screen or, if a
USB device is connected, on the computer's
screen.
RECEIVER
1
Press
MENU.
A Graphical User Interface (GUI) screen appears
on your TV. Use /// and ENTER to
navigate through the screens and select menu
items. Press RETURN to confirm and exit the
current menu.
2
Select 'MCACC Data Check' from the
HOME MENU.
3
Select the setting you want to check.
• Speaker Setting – Used to check the
settings of the speaker systems. See
Speaker Setting below for more on this.
• Channel Level – Used to check the output
level of the different speakers. See Channel
Level below for more on this.
• Speaker Distance – Used to check the
distance to the different speakers. See
Speaker Distance below for more on this.
• Standing Wave – Used to check the
standing wave control filter settings. See
Standing Wave on page 99 for more on this.
• Acoustic Cal EQ – Used to check the
calibration values of the listening
environment's frequency response. See
Acoustic Cal EQ on page 99 for more on
this.
• Output MCACC data – See Output
MCACC data on page 99 for more on this.
98
En
, then press HOME
4
Press RETURN to go back to MCACC Data
Check menu, repeating steps 2 and 3 to check
other settings.
5
When you're finished, press RETURN.
You will return to the HOME MENU.
Speaker Setting
Use this to display the speaker size and
number of speakers. See Speaker Setting on
page 104 for more on this.
1
Select 'Speaker Setting' from the MCACC
Data Check menu.
2
Select the channel you want to check.
Use / to select the channel. The
corresponding channel on the layout diagram
is highlighted.
Channel Level
Use this to display the level of the various
channels. See Channel Level on page 105 for
more on this.
1
Select 'Channel Level' from the MCACC
Data Check menu.
When 'MCACC' is highlighted, use /
2
to select the MCACC preset you want to
check.
The level of the various channels set at the
selected MCACC preset is displayed. '---' is
displayed for channels that are not connected.
Speaker Distance
Use this to display the distance from the
different channels to the listening position. See
Speaker Distance on page 105 for more on this.
1
Select 'Speaker Distance' from the
MCACC Data Check menu.
When 'MCACC' is highlighted, use /
2
to select the MCACC preset you want to
check.
The distance from the various channels set at
the selected MCACC preset is displayed. '---' is
displayed for channels that are not connected.
Advertisement
