Panasonic KX-NCP500 Pt Programming Manual page 60

Feature Programming References
•
[004] Extension Name
Feature Guide References
1.30.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
Class of Service (COS)
•
2.1.8 COS Programming
•
[602] Class of Service
Feature Guide References
2.2.1 Class of Service (COS)
Dial Type Selection
•
[410] LCOT Dialling Mode
•
[411] LCOT Pulse Rate
•
[412] LCOT DTMF Minimum Duration
Feature Guide References
1.5.4.4 Dial Type Selection
Direct In Line (DIL)
•
[421] BRI DIL/DDI/MSN Selection
•
[450] DIL 1:1 Destination
Feature Guide References
1.1.1.2 Direct In Line (DIL)
Direct Inward Dialling (DID)/Direct Dialling In (DDI)
•
[421] BRI DIL/DDI/MSN Selection
•
[451] DID Number
•
[452] DID Name
•
[453] DID Destination
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)
•
[209] DISA Delayed Answer Time
•
[210] DISA Trunk-to-Trunk Call Prolong Time
•
[211] DISA Intercept Time
•
[475] DISA Silence Detection
•
[476] DISA Continuous Signal Detection
•
[477] DISA Cyclic Signal Detection
•
[604] Extension Intercept Destination
•
[730] Outgoing Message (OGM) Floating Extension Number
•
[731] Outgoing Message (OGM) Name
•
[732] DISA Security Mode
Feature Guide References
60 PT Programming Manual