Panasonic KX-NCP500 Pt Programming Manual page 10

Hide thumbs Also See for KX-NCP500:

1.1.1 Introduction

1.1 Introduction

1.1.1 Introduction

These programming instructions are designed to serve as an overall system programming reference for the

Panasonic Pure IP-PBX. Each feature in the PBX has default settings that can be changed to customise the

PBX to your requirements. These settings control the functions of the PBX, and changing them is referred to

as "system programming".

Only one person can perform system programming at a time. Any other users trying to enter system

programming mode will be denied access.

Ways to Programme

There are two programming methods:

•

PC (Personal Computer) Programming

All features and settings of the PBX can be programmed through PC programming with Maintenance

Console. Installing and starting the Maintenance Console is described in the Installation Manual.

•

PT (Proprietary Telephone) Programming

A subset of the features and settings of the PBX can be programmed using a PT. PT programming is

described in Section 2.1 PT Programming. An extension user can perform system programming by

entering three-digit programming numbers with a PT.

PT Programming Manual

Kx-ncp1000