Troubleshooting; Introduction - Troubleshooting; Fault Messages - Husqvarna AUTOMOWER 550 EPOS Operator's Manual

7.1 Introduction - troubleshooting

All messages can be found in the
event of malfunction or symptoms can be found on www.husqvarna.com.
Note:
Messages menu is only available for short-range connectivity (Bluetooth
The

7.2 Fault messages

The fault messages in the table below are shown in the Automower
representative if the same message shows frequently.
Message
Cutting system blocked
Trapped
1576 - 006 - 27.01.2023

7 Troubleshooting

Messages menu in Automower
Cause
The blade disc is blocked by grass or
other objects.
The blade disc is in water.
The grass is high and thick.
The product is behind a number of obsta-
cles in a small area.
®
Connect. More suggestions for steps to take in the
®
).
®
Connect app. Speak to your Husqvarna
Action
Examine the blade disc and remove the
grass or other object.
Move the product and prevent the collec-
tion of water in the work area.
Adjust the cutting height to the height of
the grass.
Adjust the schedule settings to increase
the operation time.
Examine the area and remove the obsta-
cles which make it hard for the product to
move away from this location.
Troubleshooting - 31