Table of Contents
Advertisement
7.1 Messages
The messages in the table below are shown in Automower
Husqvarna representative if the same message shows frequently.
Message
Wrong PIN code
Wheel motor
blocked, right
Wheel motor overloa-
ded, left/right
Wheel drive problem,
right/left
Cutting system
blocked
Cutting height
blocked
Edge cutting system
blocked
Imbalanced edge cut-
ting system
2369 - 001 - 05.02.2024
7 Troubleshooting
Cause
An incorrect PIN code has been entered. 5
tries are permitted, and the product is then
blocked for a period of time.
The drive wheel is blocked by grass or other
objects.
The drive wheel is blocked by grass or other
objects.
The cutting system is blocked by grass or
other objects.
Grass or other objects are wound around
the cutting height adjustment, or between the
blade disc and chassis.
The edge cutting system is blocked by grass
or other objects.
The product has discovered vibrations in the
edge blade disc.
®
Connect and Automower
Action
Enter the correct PIN code. Speak to your
local Husqvarna representative if you forget
the PIN code.
Examine the drive wheel and remove the
grass or other object.
Examine the right drive wheel and remove
the grass or other objects. If the problem
stays, speak to your authorized service cen-
ter.
Examine the cutting system and remove the
grass or other objects.
Examine the blade disc and the bellows
around the cutting height adjustment, and re-
move any grass or other objects that may
have got stuck.
Examine the edge cutting system and re-
move the grass or other objects.
Examine that the blades and screws are not
damaged or worn. Make sure that all blades
are correctly installed and that there is only
one blade attached in each position on the
blade disc.
®
Access. Speak to your
Troubleshooting - 31
Advertisement
Table of Contents
