Operate The Rimage 2000I; Powering On The Rimage 2000I; Pausing The Rimage 2000I - Rimage Desktop 2000i User Manual

Rimage 2000i™

Operate the Rimage 2000i

This chapter provides the information that you need to produce CDs or DVDs with the Rimage 2000i.

Powering on the Rimage 2000i

Important! You must power on the autoloader
before you power on the computer. If the
computer starts before the autoloader is
powered on, your operating system will not
recognize the autoloader and it will not initialize
properly.
To power on the Rimage 2000i, on the back of the
Rimage 2000i, press the power switch. The power
indicator light is solid green when the Rimage 2000i is
powered on.
To power off the Rimage 2000i, on the back of the
Rimage 2000i, press the power switch again. The
power indicator light is dim when the Rimage 2000i is
powered off.

Pausing the Rimage 2000i

Before you load or unload discs from the Rimage 2000i, you must pause it.
1. To pause the autoloader, press the
operator button once. The operator
panel displays PAUSED...
2. To return to normal operation, press the
operator button again.
6
Operator
button
110763_I