Advertisement
Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Align the screw holes on the hinges and brackets with the screw holes on the display back-cover and antenna assembly.
2
Replace the two screws (M2x2) that secure the hinges to the display back-cover and antenna assembly.
3
Replace the eight screws (M2.5x2.5) that secure the hinges to the display back-cover and antenna assembly .
GUID-E3D5A4DB-BAB5-4F6F-B7B6-8BC4EF0CC57D
Released
Replacing the display hinges
computer. After working inside your computer, follow the instructions in
GUID-C679EB8D-99A6-467B-B7A5-7E6AB5C19274
Released
48
After working inside
www.dell.com/
Replacing the display hinges
101
Advertisement
