Advertisement
CAUTION:
When you disconnect a cable, pull on its connector or on its pull tab, not on the cable itself. Some cables have
connectors with locking tabs or thumb-screws that you must disengage before disconnecting the cable. When disconnecting
cables, keep them evenly aligned to avoid bending any connector pins. When connecting cables, ensure that the ports and
connectors are correctly oriented and aligned.
CAUTION:
Press and eject any installed card from the media-card reader.
Identifier
Status
Recommended tools
The procedures in this document may require the following tools:
•
Phillips screwdriver #1
•
Plastic scribe
Identifier
Status
Screw list
Table 1. Screw list
Component
Base cover
Battery
Display panel
Fan
Processor fan
Hard-drive assembly
Hard-drive bracket
Heat sink
NOTE:
Applicable only for computers shipped
with discrete configuration.
Hinges
Hinge brackets
10
Before working inside your computer
GUID-DEA55279-6FE6-4A1F-A152-21F8A5572B33
Released
GUID-173E4E1D-3729-444F-A8D5-B59D3F94E9C9
Released
Secured to
Palm rest and keyboard
assembly
Palm rest and keyboard
assembly
Display back-cover and
antenna assembly
Palm rest and keyboard
assembly
Palm rest and keyboard
assembly
Palm rest and keyboard
assembly
Hard drive
System board
Palm rest and keyboard
assembly
Display back-cover and
antenna assembly
Screw type
Quantity
M2.5x6
8
M2x3
5
M2x3
4
M2.5x6
2
M2.5x6
2
M2x3
2
M3x3
4
M2x3
4
M2.5x6
6
M2.5x2.5
8
Screw image
Advertisement
