Release Notes
Service Pack 1 for Rimage Producer Software
Suite Versions 6.5 - 7.5
Rimage Producer Software Suite 6.5 – 7.5 Service Pack 1 includes a critical update.
Rimage recommends that you install this service pack at your earliest convenience.
This document describes the changes made in Rimage Producer Software Suite versions 6.5 -
7.5, Service Pack 1.
Compatibility
Service Pack 1 is compatible only with:
•
Producer Software Suite version 6.5 (Minimum requirement)
•
Producer Software Suite version 7.1
•
Producer Software Suite version 7.2
•
Producer Software Suite version 7.3
•
Producer Software Suite version 7.4
•
Producer Software Suite version 7.5
Changes to Rimage Software Suite Components
Support and Functionality Provided
All versions:
•
Added support for the AD-5170A drive.
Production Server
Version 6.5
•
Resolved issue with not being able to set DVD-R speed back to maximum once it was
manually reduced. (Rimage reference #5610)
Version 7.1
•
Resolved issue with allowing DVD recording speed to exceed 16x when the recording speed
parameter is set to 16x. (Rimage reference #6652)
Version 7.2
•
Resolved an issue where, if performing job streaming and the network connection is lost, the
system may not recognize that subsequent discs produced are corrupt or unreadable.
(Rimage reference #7436)
Version 7.3
•
Resolved issue resulting in a PCL validation error when printer is in a "Ribbon Out"
condition.(Rimage reference #6679)
Rimage Corporation ©2008
February 4, 2008