Table of Contents
Advertisement
Setting Up
U U U U
Return the Fisher Tray that is in-
stalled on the Duplex Unit back
into place.
A Lift the top.
2
B Lower slowly.
Note
❒ After finishing all installa-
tion for printing, you can
check whether the Finisher is
installed properly. Print the
Configuration Page from the
"Print Menu" menu. If it is in-
stalled properly, you will see
"Finisher: Installed" under
the "Installed Options" list.
❒ If the Finisher is not installed
properly, reinstall from step
A
. If you cannot install it
properly even after reinstal-
lation, contact your sales or
service representative.
Reference
See p.55 "Printing the Con-
figuration Page".
40
Installing the Mail Bin Type
3800C (4-bin Mailbox)
Preparation
If you want to use the optional Pa-
per Feed Unit at the same time, in-
stall the optional Paper Feed Unit
first, and then install the 4-bin
Mailbox.
R CAUTION:
• When moving the 4-bin Mailbox,
hold the center of both sides,
and lift slowly. Lifting it carelessly
ZDJP085J
or dropping it may cause an inju-
ry.
Note
❒ The 4-bin Mailbox weighs approx-
imately 7 kg (15.5 lbs).
R CAUTION:
• When installing the 4-bin Mail-
box, be sure to hold both sides. If
you hold it by the bottom, you
might get your hand caught and
ZDJP086J
injured.
Important
❒ You cannot install the 4-bin Mail-
box and 2 Tray Finisher at the same
time.
A A A A
Turn off the power switch and
unplug the power cable.
B B B B
Remove the attached package.
ZDJP087J
Advertisement
Table of Contents
