Installing The Printer Driver Using Usb; Windows 98 Se / Me - Usb - Ricoh Aficio 1027 Safety Information Manual

Windows Configuration

Installing the Printer Driver Using USB

This section explains how to install printer drivers using USB.
1
Important
❒ Make sure that machine is connected to the computer's USB ports using the
USB interface cable.
Before installing, check that only the operating system is running on the compu-
ter and no print jobs are in progress.
The printer drivers can be installed from the CD-ROM provided with this ma-
chine.

Windows 98 SE / Me - USB

Important
❒ Installation via USB is not possible under Windows 95 / 98. Upgrade to Win-
dows 98 SE / Me.
If the printer driver has already been installed, plug and play is enabled, and the
icon of the printer connected to the "USB" port is added to the [Printers] window.
A
Turn off the power of the machine.
B
Connect the machine to the computer using the USB cable.
Connect the USB cable firmly.
C
Turn on the power of the machine.
The plug and play function starts and the [New Hardware Found], [Device Driver
Wizard], or [Add New Hardware Wizard] dialog box appears, depending on the op-
erating system.
D
Click [Next >].
E
Click [Search for the best driver for your device. {Recommended}.], and then click [Next >].
F
Select the [Specify a location:] check box, and then click [Browse...].
The [Browse for Folder] dialog box appears.
G
Insert the CD-ROM into the CD-ROM drive.
H
Specify the location where USB Printing Support is located, and then click [Next >].
If the CD-ROM drive is D, the source files of USB Printing Support are stored
in the following location:
D:\DRIVERS\RPCS\WIN9X_ME
I
Check the location, and then click [Next >].
USB Printing Support is installed.
28