Removing The Mower - Toro Wheel Horse 78345 Operator's Manual

1
3
Figure 15
1. Height-of-cut lever
2. Quadrant

Removing the Mower

1. Park the machine on a level surface, disengage the
power take off (PTO), set the parking brake, and turn
the ignition key to off. Remove the key.
2. Remove the two knobs and belt cover from the tractor
(Fig. 16).
1
2
Figure 16
1. Belt cover
3. Turn knob on idler assembly clockwise to loosen belt.
Remove belt from upper mower pulley (Fig. 17).
4
2
m–2827
3. High
4. Low
2
m–5509
2. Knob
12
2
Figure 17
1. Knob
4. Remove the belt from the clutch and deck. Refer to
Replacing the PTO Belt on page 17.
Figure 18
1. Pulley assembly
2. Front hitch
5. Raise attachment lift lever to the mounting position;
refer to the tractor Operator's Manual.
6. Open mid-mount hitch lock handle. Lower mower with
attachment lift and remove front mounting shaft
(Fig. 19).
1
m–5508
2. Upper mower pulley
2
3
1
m–2810
3. Latch