Bosch HDS8655U Use And Care Manual page 18

en-us Accessories
CAUTION
To avoid possible injury or damage to the appliance,
ensure oven rack is installed exactly per installation
instructions and not backwards or upside down.
Always push racks in fully so that they do not touch the
door panel. Make sure that you always insert the racks
into the oven cavity the right way, and not backwards or
upside down.
Flat rack
The rack is designed with a stop so it will stop before
coming completely out of the oven.
Inserting the wire rack into oven
Grasp the rack firmly on both sides.
1.
Insert the rack.
2.
Tilt the rack up to allow the stop to slide onto the rack
3.
guide.
Bring the rack to a horizontal position and push it in the
4.
rest of the way.
The rack should be straight and level.
Removing the flat rack from the oven
Grasp the rack firmly on both sides and pull it toward
1.
you.
When the stop is reached, tilt the rack up and pull it out
2.
fully.
18
Telescopic rail
WARNING
The telescopic rails become hot when the appliance is in
use.
You must take great care to avoid burning yourself
▶
when they are pulled out.
The telescopic rails allow you to pull accessories out
completely. When inserting the baking tray or roasting
shelf, ensure that it locks into place in front of the tab on
the telescopic rails.
Inserting the telescopic rail into the oven
CAUTION
To avoid possible injury or damage to the appliance,
ensure the telescopic rail is installed exactly per
installation instructions and not backwards or upside
down.
Hang the upper part of the rail onto the rack guide.
1.