Important Note - NAPCO GEMINI C Series Programming Instructions Manual

Hide thumbs Also See for GEMINI C Series:

THIS MANUAL INCLUDES FEATURES WHICH ARE ONLY AVAILABLE IN CONTROL PANEL

FIRMWARE VERSION 90.69 OR GREATER, AND REFLECTS THE FEATURES FOUND IN

PCD-WINDOWS QUICKLOADER DOWNLOAD SOFTWARE VERSION 6.4.8 OR GREATER.

The Gemini C-Series combination Fire and Burglary control panels are normally programmed with the GEMC-FK1

Fire keypad. However, the control panel can also operate as a "Burglary Only" panel (following the procedure de-

tailed in the section "BASIC OPERATION, Burg-Only Systems"), and may be programmed with the GEMC-BK1

keypad. In programming mode, the key locations used to program with the

GEMC-BK1 keypad are identical to the GEMC-FK1 keypad, however only

the button labels are different. Compare the images of the two keypads on

the cover of this volume. Note that the GEMC-FK1 keypad buttons "NEXT",

"PRIOR", "ACK." and "SILENCE" are labeled "INTERIOR", "INSTANT",

", and "BYPASS" on the GEMC-BK1 Burglary keypad, respectively.

These button equivalents are also expressed in the table at right:

Warning: The use of non-NAPCO wireless devices with this control panel has not been evaluated by UL and voids

the UL listing. In addition, the performance of these devices can not be guaranteed as compatible with NAPCO

control panels. For systems that include CO detectors, the system must be monitored by a central station.

IMPORTANT NOTE

NAPCO Security Technologies, Inc.,

333 Bayview Avenue, Amityville, New York 11701

For Sales and Repairs, call toll free: (800) 645-9445

For direct line to Technical Service, call toll free: (800) 645-9440

http://www.napcosecurity.com

GEMC-FK1

GEMC-BK1

INTERIOR

PRIOR

INSTANT

ACK.

SILENCE

BYPASS