Page 2
Added references for the new Carbon Monoxide detector to the Zone Options in Volume 2. WI1673D-2 Warning: The use of non-NAPCO wireless devices with this control panel has not been evaluated by UL and voids the UL listing. In addition, the performance of these devices can not be guaranteed as compatible with NAP- CO control panels.
Burglary-related programming changes (they can perform these remotely). As a helpful reminder, when a Locked account is opened in Quickloader, the following dialog appears: NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
"Locked". A full upload operation means the User Program Area, Dealer Program Area and Description Area selections are all checked, as shown in the following image: NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
When Quickloader indicates the account is Locked, most of the time you may assume the account and the panel pro- gramming are identical; although every effort is made to ensure the reliability of this system, some situations may arise that will cause a mismatch. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Continue Despite Mismatch: Click this button to ignore and close the Account and Panel Mismatch dia- log despite the mismatch, and manage the mismatch later. After this dialog closes, you can then attempt other NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
No to continue with the down- load ("ERROR CHECK REQ'D" will appear on the on the Fire keypad). NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Programming (and/or the Easy Menu-Driven Program Mode), and is also generally designed to allow for "non- local" downloading. Since these keypad programming modes allow changes to be made to the panel program out- NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 10
Account will be Locked after operation completes Fire changes disallowed Will check to ensure panel and Quickloader match, operation will abort if mismatch occurs. Account will be Locked after operation completes NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
In order to Site Initiate a download from PC PRESET, use the ACTIVATE DOWNLOAD feature from the keypad Function Menu. All panel programming will be overwritten. PCD Manager Not supported NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
GEMC FK1 be used as Keypad #1. A new Burg-Only Systems GEMC-FK1 is automatically configured as Keypad #1. To enable GEMC-BK1 Burglary keypad program- See Keypad Configuration Mode. ming in a Gemini C-Series "Burglary-only" system, NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 13
TROUBLE Icon - Flashes when Fire system is in trouble; steady when silenced / acknowledged. ALARM TEST DISABLED Icon - On steady when zones or cir- LCD must display "SYSTEM NORMAL" before initiating NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 14
ADVANCED MENU FUNCTIONS LOCK KEYPAD - Immediately locks keypad against affecting any system operation. DISPLAY FIRE LOG - For Fire Chief / serviceman use. See OI341. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Ambush Codes by alarms that occurred, determine the part of the system programming "Enable Ambush in User Assign Code Type". that was affected, view events in the Fire log, etc. Anoth- NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
(JP2) on the panel to the LOCAL jack (J3) on the Napco trol panels. The Easy Menu is a menu-driven utility that PCI2000/3000 computer interface using the supplied 6- prompts the installer to configure the system.
Note: If the feature "Keypad 1 Always Unlocked for User Functions" is enabled, Fire Keypad #1 will remain unlocked continually. See the Installation instructions Fire Glossary entry for this feature and "All Keypads Unlocked NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
T E S T ). Initiates a test report to the central station. tion C O M M U N I C A T O R Y / N NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 19
D I S P L A Y R F ). Allows dealer to change system programming. view this function X M I T T E R S T A T Y / N NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 20
R e p o r t i n g Y / N disabling all Fire and Burglary reporting. When disabled, the option "Enable Re- mote Reporting" will appear. Note: Exiting Dealer Program Mode will re-enable remote reporting. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
NNN represents the zone number of the sensor in question. To reset, enter the Function Menu, scroll to "RESET SENSOR MSG" and press . If you cannot correct the NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 22
). Press YES to check the status of up to 255 transmitters. The keypad will display: tion Zone number (Z01-Z96) Transmitter ID code number (6 digits) Point number (PT1 - PT4; "9" for unsupervised) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 23
GEMC-BSLC instructs each device to use its pre-existing configuration. A full Burglary SLC device initialization is also available in PCD-Windows Quick- loader download software. In the PCD-Windows Quickloader toolbar, click Panel NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
A valid number will be acknowledged by a short beep; an invalid number will be rejected by a long beep. 2. Press the button to exit. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Keypad Address Keypad Address If more than one keypad is installed, each must be assigned a unique key- pad address number (that is, no two keypads may be numbered alike): NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 26
Mode (display will read "01 OUT OF SYSTEM"). Then replace Jumper JP5 across Pins 1–2 (top two). Program Control Messages (No Message) **Enter Now** Door Control Gate Control Light Control Control #1 Control #2 NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Should it be necessary to create a new custom default program, perform as follows: From the Dealer Program Mode, press the RESET button to enter the Direct Address Program Mode. Then access Location 8177 "Clear Program" and press the ENTER button and start over. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 28
(Seen during and after initial configuration) (_ / Enter Time Enter Time (Seen during and after initial configuration) (_ : Enter a Dealer Keypad Program Code Dealer Code (Seen during and after initial configuration) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 29
Press to save and repeat for any additional zone(s); press the NEXT button to pro- ceed. NOTE: 24 Hour Zones will automatically be programmed as audible (Burg Bell). NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 30
Valid entries are from 01 to 96. Directly enter each zone number, including leading zeros. Enter Zone # Press to save and then repeat for any additional zone(s), Press the NEXT button to (Direct Entry) proceed. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 31
NEXT button to proceed. NOTE: Central Station Receiver 2 and 3 Telephone Numbers must be entered in Di- rect Address Programming. See CS Receiver Options. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 32
RECEIVER FORMAT ● Ademco Point ID* SIA* AES (not used) GEMC-NL-MOD (Sends proprietary format to NAPCO NetLink NL-CSRCV Central Station Receiver) 05 – Fire Supervision 0D – Burg Interior 16 – Combustion *These formats do not use 06 – Fire Waterflow 0E –...
Page 33
Note: “ Y” indicates option is enabled. available when address 7953 Note: “ Y” indicates option is enabled. Note: “ Y” indicates option is option 8 is enabled. (continued) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 34
CHANGING OR CANCELING A CODE: To change any code, merely program over the existing code as described above and press to save. Similarly, to cancel a code, blank out each number of the code and press to save. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 35
NEXT button to proceed when all keyfobs have been entered. NOTE: When programming the ID Code number, " 0" through "9" = through ; A = ; B = ; C = ; D = and "F" = NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 36
CHARACTERS PRESS: DISPLAYED NOTE: Zone Descriptions can only be entered through the GEMC-FK1 Keypad or IN SEQUENCE by using the Napco Quickloader Software. See Easy Menu Programming Worksheet for available zone description characters. ABC1 DEF2 GHI3 Enter an identifying description for each zone. Characters are selected by pressing keypad buttons multiple times, "Cell Phone"...
Page 37
8 1 7 9 X X Access address 8179 and press . Data entry is not allowed. NOTE: Some features (schedules) can only be programmed again with the Downloading Software. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Central Station Receiver 1 Format blank (●) = Ademco Point ID 1 = SIA 2 = GEMC-NL-MOD (Sends proprietary format to NAPCO NetLink NL-CSRCV Central Station Receiver) Enter User Codes RF Transmitter/SLC Points Keyfob Transmitters as Arm/Disarm & Control Devices ...
Page 41
EASY MENU PROGRAMMING WORKSHEET - 4 OF 13 RF Transmitter Points or SLC Devices XMTR # ZONE RF ID CHECK POINT XMTR # ZONE RF ID CHECK POINT (printed on xmtr box) (printed on xmtr box) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 42
RF Transmitter Points or SLC Devices (cont'd) XMTR # ZONE RF ID CHECK POINT XMTR # ZONE RF ID CHECK POINT (printed on xmtr box) (printed on xmtr box) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 43
RF Transmitter Points or SLC Devices (cont'd) XMTR # ZONE RF ID CHECK POINT XMTR # ZONE RF ID CHECK POINT (printed on xmtr box) (printed on xmtr box) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 44
Programming Instructions, Volume 1 EASY MENU PROGRAMMING WORKSHEET - 7 OF 13 Keyfob Transmitters Area RF ID CHECK KEYFOB # OPTION 1 OPTION 2 (2-8) (Printed on transmitter box) Dealer Code NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 45
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 46
Page 46 Programming Instructions, Volume 1 EASY MENU PROGRAMMING WORKSHEET - 9 OF 13 Zone Descriptions (cont'd) AVAILABLE CHARACTERS (See below) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 47
Programming Instructions, Volume 1 Page 47 EASY MENU PROGRAMMING WORKSHEET - 10 OF 13 Zone Descriptions (cont'd) AVAILABLE CHARACTERS (See below) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 48
Page 48 Programming Instructions, Volume 1 EASY MENU PROGRAMMING WORKSHEET - 11 OF 13 Zone Descriptions (cont'd) AVAILABLE CHARACTERS (See below) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 49
Programming Instructions, Volume 1 Page 49 EASY MENU PROGRAMMING WORKSHEET - 12 OF 13 Zone Descriptions (cont'd) AVAILABLE CHARACTERS (See below) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 50
Page 50 Programming Instructions, Volume 1 EASY MENU PROGRAMMING WORKSHEET - 13 OF 13 Zone Descriptions (cont'd) AVAILABLE CHARACTERS (See below) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
"Binary" format). DETERMINE THE DATA ENTRIES Referring to the ZONE FEATURES page in the programming worksheets that follow, "Exit/Entry Follower" for zones 1 through 8 are located at address 2018. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 52
Address 5306. The existing data will display and the cursor will ad- 5306 vance to the data field. 5. Press . The numbers 015 will appear on the keypad display indicating the number of NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 53
PROGRAM THE DATA ENTRIES 1. Enter the panel's Dealer Security Code, then press 2. Answer NO to all questions until "ACTIVATE PROGRAM Y/N" is displayed; then press YES. NOTE: If you pass NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
(via the keypad) their custom default program or to make minor field alterations to an existing control panel program. The panel MUST be uploaded to NAPCO's PCD-Windows software following any keypad program- ming; the PCD-Windows's error-check feature must be utilized to reduce the possibility of programming omissions or conflicts.
"Fire Water Flow" (see volume 2 for Zone Options). The maximum time allowed for UL installations is 90 seconds. ** All entries for "Chime Time" (address 5307) are in quarter seconds (.25 seconds). Therefore, the default of 008 results in a 2 second timeout. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
1. Enter in both left and right digits of address locations. 2. Valid entries are: 0-9. Note: If left blank, the Master Security Code must then be used to enter programming. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
* If both are selected, 1400Hz has priority over 2300Hz. 3/1 with Extended Restores ** For NAPCO NetLink™ installations only: For each telephone num- Report to TCP/IP Receiver (Telco 3)** ber desired, enable to allow the panel to report alarms via the NL-MOD accessory.
Page 60
1. Enter 3 or 4 digits (depending on the CS receiver format) for each subscriber number from left to right. NOTE: Leave trailing boxes blank (•). 2. Valid entries are: 1-9, 0 and B-F. NOTE: A is not permitted. Press to save. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
* NOTE: If neither TouchTone Dialing nor Disable Wait for Handshake TouchTone w/Rotary Backup is selected, then system defaults automatically to Rotary Dialing. Handshake for Local Telemetry Leave blank (•) to select Rotary Dialing. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
User Closing Telco 3 NOTE: These opening events will report as the user number shown. Also, Keyfobs 1-16 (see Easy Menu Program Driven Mode) will report as Users 180-195, respectively. NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 65
Driven Mode) will report as Users 180- User Opening Telco 1 1774 195, respectively. User Closing Telco 1 1799 User Opening Telco 3 1824 User Closing Telco 3 continued in Volume 2 (WI1673-2) NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...
Page 68
For Sales and Repairs, (800) 645-9445 For Technical Service, (800) 645-9440 or visit us at http://tech.napcosecurity.com/ (Note: Technical Service is for security professionals only) Publicly traded on NASDAQ Symbol: NSSC NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 1 NAPCO Security Group...