Sharp MX-C407F User Manual page 91

Understanding the printer menus
Menu item
Fax Number Masking
Off*
From Left
From Right
Digits to Mask
0–58 (0*)
Enable Line Connected
Detection
Off
On*
Enable Line In Wrong Jack
Detection
Off
On*
Enable Extension in Use
Support
Off
On*
Optimize Fax Compatibility
Fax Transport
Analog*
etherFAX
None
T.38
Note: An asterisk (*) next to a value indicates the factory default setting.
Fax Send Settings
Menu item
Resolution
Standard*
Fine
Super Fine
Ultra Fine
Original Size
[List of paper sizes]
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the format for masking an outgoing fax number.
Specify the number of digits to mask in an outgoing fax number.
Determine whether a telephone line is connected to the printer.
Notes:
•
Detection takes place when turning on the printer and before each call.
•
This menu item does not appear if Fax Transport is set to T.38.
Determine whether a telephone line is connected to the correct port on the
printer.
Notes:
•
Detection takes place when turning on the printer and before each call.
•
This menu item does not appear if Fax Transport is set to T.38.
Determine whether a telephone line is used by another device, such as another
phone on the same line.
Notes:
•
This menu item is monitored continuously after turning on the printer.
•
This menu item does not appear if Fax Transport is set to T.38.
Configure the printer fax functionality for optimal compatibility with other fax
machines.
Set the fax transport method.
Description
Set the resolution of the scanned image.
Note: A higher resolution increases fax transmission time and requires higher
memory.
Specify the size of the original document.
Note: Letter is the U.S. factory default setting. A4 is the international factory
default setting.
91