Dell Inspiron 5585 Service Manual page 72

Table 5. System setup options—Security menu (continued)
Security
Computrace
SED Block SID Authentication
PPI Bypass for SED Block SID Command
Firmware TPM
PPI Bypass for Clear Command
UEFI Firmware Capsule Updates
WINDOWS SMM SECURITY MITIGATIONS TABLE
(WSMT)
Table 6. System setup options—Boot menu
Boot
Fast Boot
Secure Boot
Load Legacy Option ROMs
Boot List Option
Attempt Legacy Boot
File Browser Add Boot Option
Table 7. System setup options—Exit menu
Exit
Exit Saving Changes
72 System setup
Enables or disables the BIOS module interface of the
optional Computrace Service from Absolute Software.
Default: Deactivate
Enables or disables SED Block SID Authentication.
Default: Disabled
When there is no drive ownership and the
ppibypassforblocksid is enabled, BIOS requires user input
while sending the Block SID authentication command to
SED drives. When ppibypassforblocksid is disabled, BIOS
does not require user input while sending the Block SID
command.
Default: Disabled
Enable or disable the firmware TPM.
Default: Enabled
Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip
BIOS PPI user prompts when issuing the Clear command.
Changes to this setting take effect immediately.
Default: Disabled
Enables or disables BIOS updates through UEFI capsule
update packages.
Default: Enabled
Enables or disables configuration of platform features on
Dell Client Systems with WSMT-enabled BIOS.
Default: Enabled
Enables or disables the fast boot option.
Default: Minimal
Enables or disables the secure boot feature.
Default: Disabled
Enables or disables the Load Legacy Option ROMs.
Default: Disabled
Displays the available boot options.
Default: UEFI
Enables or disables legacy boot.
Default: Disabled
Allows you to add the boot options.
Allows you to exit system setup and save your changes.