Chapter 30: Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 5585 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1. Remove the base cover.
2. Remove the wireless card.

Procedure

1. Peel off the tape that secures the I/O-board cable to the I/O board.
2. Note the routing and remove the I/O-board cable from the routing guides.
3. Peel off the tape that secures the display cable to the display cable connector.
4. Open the latch and disconnect the display cable from the system board.
5. Remove the display cable from the routing guide.
6. Remove the five screws (M2.5x5) that secure the display hinges to the palm-rest and keyboard assembly.
7. Open the display at an angle of 90 degrees.
Removing the display assembly
computer. After working inside your computer, follow the instructions in
www.dell.com/
Removing the display assembly
30
After
51