Unpacking And Inspecting The Components; Selecting The Equipment Location; Sounder Module Mounting Location - Raymarine DSM250 Owner's Handbook Manual

2-4

2.2 Unpacking and Inspecting the Components

2.3 Selecting the Equipment Location

Sounder Module Mounting Location

Unpack your system carefully, to prevent damage to the equip-
ment. Save the carton and packing, in case you need to return a
unit for service.
Check that you have all the correct system components. These
depend on your system package, as follows:
Table 2-1: Parts and Accessories
Item
DSM250 Digital Sounder Module
Handbook, DSM250
Handbook, Transducers for Fishfinders
Quick Reference Card, Fishfinder mode
Mounting screws, #8 (x4)
Power cable, 3 pin, 3 m
cable assy
2
hsb
3 ft 3 in (1 m)
10 ft (3 m)
20 ft (6 m)
30 ft (10 m)
60 ft (20m)
In Line Terminator
hsb 2
Splitter Cable
hsb 2
Transducer and Cables (See
Transducers for Fishfinders Handbook
The DSM250 is waterproof to CFR46 is and designed to be
mounted either above or below deck. The unit should be protected
from physical damage and excessive vibration.
WARNING:
Mount the DSM250 in a protected area away from prolonged
exposure to rain, salt spray, and direct sunlight, but well
ventilated. Locate the sounder as close to the transducer as
possible. Raymarine suggests not locating the DSM250 on the
main console.
DSM250 Digital Sounder Module
Part No.
E62007
81211
81196
86066
N/A
R69053
R55001
R55002
R55003
R55004
E55010
R58117
E55040
81196
—
)
Supplied / Option
supplied
supplied
supplied
supplied
supplied
supplied
option
supplied
option
option
option
option
option
—