Raymarine DSM250 Owner's Handbook Manual page 86

5-26
➤
To reposition the zoom window:
1. If you have not already done so, make sure the unit is set to
MANUAL zoom.
2. If the cursor is not already visible, press ENTER for the cursor to
appear.
3. Use the trackpad to place the cursor in the zoom window. The text
ZOOM is displayed near the cursor, as in Figure 5-10 .
4. Press ENTER. A horizontal Zoom Position Line appears, indicat-
ing the cursor is active. See Figure 5-11 .
5. Use the trackpad to move the Zoom Position Line up or down on
the screen:
Moving the line UP toward the surface moves the Zoom Window
DOWN toward the bottom.
Moving the Zoom Position Line DOWN moves the Zoom Win-
dow UP.
Note: If you wish to move the window beyond what is displayed,
you must move the Zoom Position Line to the edge of the window,
ENTER
press , return the Zoom Position Line to the opposite edge
of the window, and then repeat the process. You may need to do
this several times.
6. After you have moved the Zoom Position Line to the desired posi-
tion, press ENTER to reposition the zoom image, or CLEAR to
cancel the operation.
DSM250 Digital Sounder Module