Table of Contents
Advertisement
13-2-13. The floor, tenant, area, or air conditioner is not displayed
in the proper order.
No.
1
The inputs in the setting file are incorrect.
13-2-14. The date or time is not properly displayed.
No.
1
The controller has been off for long hours.
13-2-15. The value of air temperature is incorrect.
No.
1
The air temperature displays the intake temperature
corrected for the room temperature control of the air
conditioner.
Cause
Cause
Cause
The floor, tenant, and area are displayed in the order of the floor number,
tenant number, and area number set in the setting file. Change the display
order as needed.
The air conditioners are displayed in the order of outdoor system number and
indoor units number set in the air conditioner. Change the display order as
needed. If the order cannot be changed, change the air conditioner number
in the setting file.
In [Clock and calendar setting] from the option in the menu, set the current
time.
The displayed and actual temperatures differ because correction amount
varies depending on an operation mode (cooling or heating).
42
Solution
Solution
Solution
Advertisement
Table of Contents
