PARTS
1. On/off switch
2. Pivoting head and cutter assembly
3. Individual flexing heads
4. Hairpocket
5. Turbo button
6. Shave - Learn LEDs
7. Power connector
8. Adjustable stubble comb (1-5mm)
GETTING STARTED
CHARGING
•
It is recommended to fully charge your appliance before using it for the first time.
•
Ensure the product is switched off.
•
Connect the product to the USB cable and then to the USB end of the cable to a
powered USB port.
SHAVE-LEARN LEDS
Number of shaves remaining
During use, your shaver continuously analyses the average time it takes you to shave.
The LEDs are all lit when the battery has enough charge for 5 shaves or more. When it
senses that there are only 5 shaves remaining before the battery needs to be recharged,
the LEDs will show each remaining shave left when you turn on your shaver. All 5 LEDs
means you have 5 or more shaves left, 4 LEDs, 4 shaves, etc. The LEDs will fade out after 5
seconds.
Charging
During charging, the 5 LEDs act as a fuel gauge with each LED representing 20% of the
battery charged. When your shaver is fully charged, all of the LEDs will switch off.
•
Run time from fully charged is up to 60 mins.
•
Charge time from empty is 90 minutes.
•
Do not recharge your product after each use as this will shorten the life of the battery.
•
Note: To preserve the life of your batteries, let them run out every 6 months then
fully charge.
QUICK CHARGE FEATURE
•
Your shaver has a 5 minute quick charge feature that will provide enough charge for
1 shave (3 minutes).
9. Detail trimmer
10. Comb adjustment dial
11. Head release button
Not shown
•
USB charging cable
•
Cleaning brush
•
Head guard
•
Travel case
5