Cancelling The Programme; End Of Programme - Beko WUE 8612 XS0 User Manual

Adding and removing laundry
1. Press the "Start/Pause" button to pause the
machine. The programme follow-up light of
the relevant step during which the machine
was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the loading door and add or take out
laundry.
4. Close the loading door.
5. Make changes in auxiliary functions,
temperature and speed settings if
necessary.
6. Press the "Start/Pause" button to start the
machine.

4.3.16 Cancelling the programme

To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be cancelled. End/
Cancel light will flash continuously to notify that
the programme has been canceled.
When you turn the Programme Selection knob,
the machine will end the programme but will not
discharge the water inside. When you select
and start a new programme, the newly selected
programme will start depending on the step
the previous programme was canceled in. For
example, the machine may take in additional
water or continue to wash with the water inside.
C
INFORMATION
• Depending on the step where the
programme was canceled in, you may have
to add detergent and softener again for
the programme you have selected anew.
20 / EN

4.3.17 End of programme

At the end of the programme, "End" will be
displayed.
1. Wait until the light of the loading door goes
off completely.
2. Switch the programme selection knob to
On/Off to switch off the machine.
3. Take out your laundry and close the loading
door. Your machine is now ready for the
next washing cycle.
4.3.18 Your machine has the
"Pause Mode" function.
After using the On/Off button to switch on the
machine, if you do not start any programme
in the selection step or do not perform
anything else, or if you do not do anything in
10 minutes after the selected programme has
ended, the machine will automatically switch
to energy saving mode. Also, if your product
has a display that shows programme time,
this display will completely turn off. If you turn
the Programme Selection knob or touch any
button, the lights and the display will switch
back to the previous position. The selections
you make when exiting the energy efficiency
mode may change. Check if your selections
are correct before starting the programme. If
necessary, make adjustments again. This is not
an error.
Washing Machine / User's Manual