Beko WUE 8612 XS0 User Manual page 18

To disable Child Lock:
Press and hold the Auxiliary Function button 2
for 3 seconds while the programme is running.
While you're holding the button pressed for 3
seconds, C03, C02 and C01 will be displayed
respectively. Then, "COF" will be displayed to
warn the user that child lock is disabled.
C
INFORMATION
• In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On/Off
position when no programme is running,
and select another programme.
• Child Lock will not be disabled after
a power failure or unplugging.
• Anti Crease+
If you press and hold the auxiliary function
button 3 for 3 seconds, this function will
be selected and the programme follow-up
light of the relevant programme will turn on.
When this function is selected, the drum will
rotate for up to eight hours to ensure that
the clothes do not crease at the end of the
programme. At any time during these eight
hours, you can cancel the programme and
unload the machine. Just press any button
or turn the programme selection knob to end
the function. The programme follow-up light
will remain on even if you end the function by
pressing any button. If you end the function
by turning the programme selection knob, the
programme follow-up light will remain on or go
off depending on the selected programme. If
you do not cancel the function by pressing the
Auxiliary Function button 3 for 3 seconds, it
will be used in the next washing cycles as well.
4.3.11 - End Time Adjustment
The End Time Adjustment function allows you
to set the end time of the programme up to 19
hours. You can increase this time by 1-hour
intervals.
C
INFORMATION
• Please do not use liquid detergent
if you have selected the End
Time Adjustment function. Stains
might remain on the clothes.
1. Open the loading door, place the laundry
and add detergent, etc.
18 / EN
2. Select the washing programme,
temperature, spin speed and, if required,
the auxiliary functions.
3. Press the End Time Adjustment button and
select the desired time.
4. Press the Start/Pause button. The delayed
end time you have set will be displayed.
Countdown will start for delayed end. On
the display, "_" will move up and down next
to the delayed end time.
C
INFORMATION
• If the programme has not started,
you can add laundry into the machine
during the delayed end time.
5. At the end of the countdown, duration of
the selected programme will be displayed.
"_" will disappear and the selected
programme will start.
Changing the delayed end time
If you want to change the time during countdown:
Turn the programme selection knob to cancel the
delayed end time function, and then set the desired
time again.
1. Press the End Time Adjustment button.
When pressed for the first time, the
programme duration will be rounded up
to the closest whole number time. Each
following press will increase the time by an
hour.
2. If you want to decrease the delayed end
time, press the End Time Adjustment button
consecutively until the desired time is
displayed.
Cancelling the delayed end function
If you want to cancel the delayed end
time countdown and start the programme
immediately:
1. Set the Programme Selection knob to any
programme. This way, the Delayed End time
will be cancelled. The End/Cancel light will
flash continuously.
2. Then, select the programme you want to
run again.
3. Press Start/Pause button to start the
programme.
Washing Machine / User's Manual