Brother MFC-J815DW Online User's Manual page 108

Hide thumbs Also See for MFC-J815DW:

Table of Contents

Document Size

Remove Background Change the amount of background color that is removed.

10. Press Black Start or Color Start.

1. Load your document.

2. Press [Scan] > [to PC] > [to File].

3. If the machine is connected over the network, press a or b to display the computer where you want to send

data, and then select the computer name.

If the LCD message prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer,

and then press [OK].

4. Do one of the following:

To change the settings, press [Options] or [Set at Device].

Press [Start] to start scanning without changing additional settings.

The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to

complete the scanning job.

To use the [Options] or [Set at Device] setting, you must connect a computer with ControlCenter4

(Windows) or Brother iPrint&Scan (Mac) software installed to the machine.

5. Select the scan settings you want to change, and then press [OK].

Document Size

ADF Auto Deskew

Skip Blank Page

Remove Background Color Change the amount of background color that is removed.

To save the settings as a shortcut, press [Save as Shortcut]. You will be asked if you want to

make this a One Touch Shortcut. Follow the LCD instructions.

6. Press [Start].

Select the scan resolution for your document.

Select the file format for your document.

Select your document size.

Select the brightness level.

Select the contrast level.

Select the scan type for your document.

Select the scan resolution for your document.

Select the file format for your document.

Select your document size.

Select the brightness level.

Select the contrast level.

Correct any skewed documents when they are scanned using the ADF.

When On is selected, blank pages are skipped.

Mfc-j805dw Mfc-j995dw