Chevrolet Spark EV 2016 Getting To Know Your page 9

Efficiency
Information Displays
Power Flow
Charging
Energy Information
Press the Leaf button on the center
stack and then touch the desired tab at
the bottom of the screen to display
Power Flow, Charging and Energy
Information.
The Power Flow screens show the current
system operating condition, including
Battery Power (Active), Battery Power
(Stationary), Regen Power Recovery, and
Power Off. Each component is highlighted
when it is active.
The Charging screens show the charge
mode status. The three programmable
charge modes are:
• Immediately upon plug-in
• Delayed based on Departure Time
• Delayed based on electric Rate and
Departure Time
The Energy Information screens show how
energy has been used since the last full
charge, energy use over the last 5 miles
or 50 miles, and energy tips to improve
energy use and increase economy.
See Instruments and Controls in your Owner Manual.
9