Chevrolet Spark EV 2016 Getting To Know Your page 5

Getting Started
Starting and Stopping the Vehicle
The Spark EV features a push-button start/stop ignition system. The POWER button
flashes when the driver's door is open and the vehicle is not ON. Once the vehicle is ON,
the button illuminates. The RKE transmitter must be in the vehicle.
Note: A fan may run anytime the vehicle is ON to cool the propulsion battery.
Seat Adjustment
Before driving, adjust the seat and steering wheel to a comfortable position.
A
B
C
Starting the Vehicle/ON
With the vehicle in Park or Neutral, press
the brake pedal and then press the
button.
The
Vehicle Ready
light will illuminate on the
instrument cluster when the
vehicle is ready to drive.
If the vehicle is still plugged
in, the vehicle will not shift
out of Park and a Charge
Cord Connected message
will be displayed.
Stopping the Vehicle/OFF
Shift to Park and then press the
button.
See Driving and Operating in your Owner Manual.
Pull down the lever (A) to unlock the steering
wheel and adjust its position.
Lift the bar (B) under the front of the seat to
slide the seat forward or rearward.
Turn the knob (C) to raise or lower the seat.
D
Lift the rear lever (D) to recline or raise the
seatback.
See Seats and Restraints in your Owner Manual.
POWER
POWER
5