Kenmore 111.72695120 Service Manual page 71

10. Disassemble/Assemble Procedures
10-17. Freezer Defrost Sensor and Heater in the Evaporator Assembly
Step
1
2
Pull out the evaporator from 2 hooks on the
back wall.
3
4
□ Remark :
• Do not miss 2 cable ties. They could block two drain holes and
the drain water will overflow into freezer.
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
left and right
Remove the three
connectors.
Cut the cable
ties and
remove the
defrost
sensors on left
side of Eva.
Cut the cable ties
and remove two
temp fuse covers on
right side of Eva.
※ Follow the reverse order when assembling.
Step
5
6
7
8
Remove the heater from Eva.
Description
Remove two temp
fuses of defrost heater.
remove clamping parts. (the
left and right side of Eva)
Bend out the lower clamping
parts (the left and right side
of Eva) to remove the pipe of
defrost heater.
70 / 69