Network Configuration - Planet WBS-900AC-KIT User Manual

The page includes the following fields:
Object
SSID
Business VLAN ID
Management over wireless
Multicast enhancement
5.3.3.2.

Network Configuration

By using the network configuration interface in the settings, you can control the network configuration of the
device.
Using the Ethernet configuration table, you can configure the Ethernet interface.
Description
Manually specify the SSID for the wireless network device, or
automatically scan for access points.
Specify the VLAN ID that traffic is tagged for on a specific VAP
interface. Devices associated with a specific SSID will be grouped
into this VLAN. Mapping to the data VLAN ID is not available if the
device is running in router network mode.
Control wireless management access. For security reasons, it is
recommended to disable wireless access and use Ethernet cable
for physical network connection to manage CPE access. Wireless
management is not available if the device is running in router
network mode.
If clients do not send IGMP (Internet Group Management Protocol)
messages, they will not register as recipients of multicast traffic.
With IGMP listening, the multicast enhancement option isolates
multicast traffic from unregistered clients and allows devices to
send multicast traffic to registered clients at higher data rates. This
reduces the risk of traffic overload on PtMP links and increases the
reliability of multicast traffic as packets are retransmitted if the initial
transmission fails. If clients do not send IGMP messages but should
receive multicast traffic, you may need to disable multicast
enhancement. This option is enabled by default.
Figure 5-20 Network Settings
-32-
User Manual of WBS-900AC-KIT