RS232 via LAN
PC or laptop
Settings
1.
Find the Wired LAN IP address of the connected projector from the OSD menu and make sure the
projector and the computer are within the same network.
2.
Input 8000 in the TCP port # field.
RS232 via HDBaseT
PC or laptop
Settings
1.
Determine the COM Port name used for the RS232 communications in Device Manager.
2.
Choose Serial and the corresponding COM port as the communication port. In this given example,
COM6 is selected.
HDBaseT compatible device
D-Sub 9 pin
D-Sub 9 pin
6
RJ45 port on a projector
LAN cable
RJ45
LAN cable
RJ45 port on a projector