Table of Contents
Advertisement
84
en | Archive Player
8.4
Viewing Images
8.4.1
Assigning Cameos
A cameo is a single camera picture in a multiscreen display.
To assign a camera to a cameo:
1.
2.
To undo a cameo assignment:
If audio is present on the channel when a cameo is selected, it will be played.
8.5
Using the playback controls
Figure 8.3 Archive Player - playback controls
Play
Click the Play
Play Reverse
Click the Play reverse
Playback Speed
The slider controls the speed of the continuous forward and reverse play.
Still
Click the Still
Step forward
The step function is only enabled in the still mode.
1.
2.
Step backward
The step function is only enabled in the still mode.
1.
2.
AM18-Q0605 | v2.0 | 2012.04
Click on a Cameo;
–
the selected cameo has a yellow border.
Double-click a camera from the list.
–
Click the close button on the cameo.
button to play recorded video forward in the playback window:
–
The playback speed depends on the setting of the speed
–
Some frames may be dropped depending on the PC resources, selected playback
speed, or insufficient network bandwidth.
button to play recorded video in reverse in the playback window:
–
The playback speed depends on the setting of the speed
–
Some frames will be dropped in Play Reverse as a result of the compression
process. Additional frames may be dropped as a result of the selected playback
speed or insufficient network bandwidth.
button to pause playback;
–
The last image is shown as a still in the playback window.
Click the Step forward
Hold it down to continue stepping at a maximum rate of 3 images per second.
Click Step backward
Hold it down to continue stepping at a maximum rate of 3 images per second.
Installation and Operation manual
button to move the image forward one frame.
to move the image back one frame.
Digital Video Recorder 440/480 Series
Bosch Security Systems
slider.
slider.
Advertisement
Table of Contents
