Table of Contents
Advertisement
78
en | Web Client Software
3.
4.
Zoom, focus, and iris
To control the zoom, focus, and iris of PTZ cameras:
1.
2.
3.
4.
5.
Pre-position
To move the active camera to a pre-position:
1.
2.
Click buttons one to six for immediate positioning to one of the first six pre-positions.
To store the current position of the camera in a pre-position:
1.
2.
3.
Aux commands
Aux commands are special commands for controlling cameras. To switch on the Aux
command:
1.
2.
3.
7.4.2
Camera views
To switch the display mode, click one of the camera view
change the cameo display configuration:
–
–
AM18-Q0605 | v2.0 | 2012.04
Click and hold the left and right arrows to pan.
Release the mouse button to stop camera movement controls.
Select the cameo of the camera to be controlled.
Click and hold the left zoom button
button
to zoom in.
Click and hold the left focus button
button
for near focus.
Click and hold the left iris button
button
to open the iris.
Release the mouse button to stop camera adjustment controls.
Enter a pre-position number using the keyboard.
Click Shot (or press enter).
Position the camera.
Enter a pre-position number.
Click Set.
Enter an Aux number.
Click Aux + (or press enter).
To switch off the Aux command, click Aux -.
Single
view, Quad
Full Screen
expands the current display mode to fill the entire screen. Press ESC to
exit Full Screen.
Installation and Operation manual
to zoom out; click and hold the right zoom
for far focus; click and hold the right focus
to close the iris; click and hold the right iris
view, and Sequence
Digital Video Recorder 440/480 Series
buttons to
display modes are available.
Bosch Security Systems
Advertisement
Table of Contents
