Wi-Fi Setup Wizard - D-Link DSL-2750U User Manual

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual

Wi-Fi Setup Wizard

To specify all needed settings for your wireless network, click the Configure Wi-Fi button.
On the opened page, in the Common settings section, select the Enable Wireless checkbox (if
it was deselected before) to enable Wi-Fi connections.
Click the Next button to continue.
In the Basic settings section, you can change the basic parameters of your router's WLAN:
"hide" your wireless network (Hide Access Point), specify a name for the network (SSID),
select your location (Country) and the wireless channel number (Channel), isolate users of your
WLAN from each other (Clients Isolation), and enable the guest part of your WLAN (Enable
Wireless Guest Network) and change its name (Guest SSID).
Click the Next button to continue.
Figure 45. The page for enabling/disabling the wireless LAN.
Figure 46. Basic settings of the wireless LAN.
Page 51 of 138
Configuring via Web-based Interface