Interface Grouping - D-Link DSL-2750U User Manual

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual

Interface Grouping

On the Advanced / Interface grouping page, you can assign virtual PVC connections to the
router's ports (create groups of interfaces), which allows distinguishing different types of traffic.
This function is mostly used in Triple-play networks. Also on the page you can configure the router
to connect to a private Ethernet line.
The Ethernet WAN function allows using any Ethernet port of the router to access the
!
Internet via Ethernet technology. When the function is enabled, the router is still able to
access the Internet via ADSL technology.
To enable the Ethernet WAN function, follow the steps below.
1. Select the choice corresponding to the LAN port that will be used as the WAN port of the
Ethernet WAN port radio button.
2. If you need to assign one or more tagged VLAN connections or several untagged
connections to the created Ethernet WAN interface, select the VLAN MUX Mode choice of
the Ethernet WAN type radio button.
3. Click the Save button.
Figure 81. The Advanced / Interface grouping page.
Page 95 of 138
Configuring via Web-based Interface