Imbalanced Coverage; Out-Of-Range Radio; Site Trunking Feature; Site Search - Motorola APX 5000 1 User Manual

Table of Contents

Advertisement

68012002066-HU
Chapter 7 : Advanced Features
To continue in Failsoft and to communicate with other talkgroups, refer to the following procedure.
Procedure:
1 Rotate the 16–Position Select Knob to change to a different repeater frequency.
2 Press the PTT button to talk, and release the button to listen.
7.18.2

Imbalanced Coverage

Imbalanced coverage occurs when the radio is able to receive the control channel but is unable to
transmit back to the system. The radio generates a periodic tone and displays No Comms.
7.18.3

Out-of-Range Radio

Your radio can no longer lock onto a control channel when out-of-range from the system.
When out-of-range, your radio shows the following indications:
A tone sounds.
The display shows the currently selected zone or channel combination, and out-of-range
notification.
Your radio remains in this out-of-range condition until it locks onto a control channel or failsoft channel,
or if it is turned off.
7.18.4

Site Trunking Feature

If the Zone Controller loses communication with any site, that site reverts to site trunking. When this
occurs, you can communicate only with the radios within your trunking site.
The display shows the currently selected zone or channel, and the site trunking message.
7.18.5

Site Search

When searching for a site, your radio is inoperable. In the site search mode, your radio scans for
trunked control channels but has yet to connect to the trunking system or reach other trunking states.
Other trunking states are such as Out of Range and Imbalanced Coverage.
The Searching site indicator alerts you that your radio is attempting to search for a valid trunked
control channel.
7.18.6

Locking and Unlocking a Site

When and where to use: This feature allows your radio to lock onto a specific site and not roam
among wide-area talkgroup sites. This feature should be used with caution, since it inhibits roaming to
another site in a wide-area system.
Procedure:
Use the preprogrammed Site Lock/Unlock button to toggle the lock state between locked and
unlocked.
The radio saves the new site lock state and returns to the Home screen.
64

Advertisement

Table of Contents
loading

Table of Contents