Table of Contents
Advertisement
Your radio supports up to 250 site aliases. Only authorized radios are enabled to send SSA.
NOTE:
The alert alias, alert tone, and alert period are configured in the Customer Programming
Software (CPS). For more information, contact your system administrator.
The SSA alert volume is reduced when voice audio is received at the same time. It is important
that the SSA audio file is created with clear loud audio to ensure audio clarity at reduced levels.
7.23
Wi-Fi
You can connect your radio to a Wi-Fi network for wireless programming and SmartConnect features.
Your service administrator programs the Wi-Fi Service Set Identifier (SSID) or network name that your
radio can connect to.
7.23.1
Turning Wi-Fi On or Off
Procedure:
•
Turning Wi-Fi
®
on or off using the preprogrammed button:
a. To toggle the Wi-Fi on or off, press the preprogrammed Wi-Fi button.
This button must be preprogrammed by a qualified radio technician. Check with your dealer
or system administrator for more information.
The display shows WIFI ON or WIFI OFF.
7.23.2
Selecting WiFi Network
This feature allows you to view and select the available WiFi network.
Procedure:
1 Press the Menu Select button directly below WiFi to enter WiFi screen.
2 Press the Menu Select button directly below On to turn on the WiFi.
Radio starts searching for available network.
3 Press the Menu Select button directly below List.
Radio displays available network selection and the network signal strength.
If the radio displays No network available, press the Menu Select button directly below
RefreshRFSH to search for available networks.
4 Press or to scroll through the list and press Menu Select button directly below Sel to connect to
the selected network.
Radio displays the WiFi status, the selected network, and the signal strength.
NOTE: The List and RefreshRFSH buttons are not available when WiFi is searching or
connecting to network.
68012002066-HU
Chapter 7 : Advanced Features
69
Advertisement
Table of Contents
