Programming your telephone
4.8.6
Set the delay before the screensaver is activated
Display
•
→
Set the time delay (default 4 hours) –
•
4h/1h/30min/15min/5min/1min.
•
•
4.9
Activate or disable proximity detection
When this option is checked, the phone automatically detects when you approach it and switches to
the idle state on the homepage (screen saver off and backlight on).
Display
•
→
Activate or deactivate the feature.
•
When activating proximity detection, select proximity
•
sensitivity:
Sensitivity
The lower the sensitivity, the closer you have to get to wake up
your desk phone (light up the screen). It is not recommended
to set the sensitivity too high in very busy locations.
•
4.10 Selecting the welcome page
This function is used to choose the page displayed by default on the telephone.
Reach the 'Menu' page.
•
Settings
Phone
•
→
Enter your password (if required) and
•
Select the default page (Menu, Perso, Info, Last page seen...).
•
•
•
4.11 Selecting language
Reach the 'Menu' page.
•
Settings
Phone
•
→
Enter your password (if required) and
•
Select the language of your choice.
•
•
•
8AL90399ENAD ed01
Screensaver
→
Advanced
Proximity sensor
→
→
Low, Mid, High.
→
Homepage
→
Language
→
apply.
apply.
93/141