6
•
Locking the keypad:
Ok
Lock Keys
OK
OK
•
Lock the keypad automatically:
you can configure your set so that the keypad is blocked automatically after 5, 10 or 20 seconds.
Ok
Keypad autolock
OK
OK
•
Unlocking the keypad:
#
Configure the set according to the background noise (Noise mode)
6.12
This function is used to configure the set to obtain optimal listening conditions depending on the background noise.
Phone Settings
OK
OK
OK
•
Normal: corresponds to most office environments.
•
High: corresponds to an average level of background noise.
•
Severe: corresponds to an extremely high level of background noise.
Programming your telephone
OK
select the time
period before
the automatic
locking
Noise mode
OK
OK
OK
select the
ambient
volume level
Activate/deactivate the Key tones
6.13
By default the set emits a tone each time a key is pressed.
To deactivate these tones:
Phone Settings
OK
OK
Desable Tones
Enable Tones
OR
Activate/deactivate the Warning tones
6.14
The warning tones inform the user of an abnormal operation (out of range, system activated or halted, etc.).
To deactivate these tones:
Phone Settings
OK
OK
Enable Tones
Desable Tones
OR
22
Key Tones
OK
OK
OK
OK
Warning Tones
OK
OK
OK
OK