Miele marine PG 8059 Operating Instructions Manual page 11


There must be no electrical sockets behind the dishwasher. Danger
of overheating and fire risk if the dishwasher were to be pushed up
against a plug (see "Electrical connection").

Do not connect the dishwasher to the mains electricity supply by a
multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).

Do not open the dishwasher casing. Tampering with electrical
connections or components and mechanical parts is highly
dangerous to the user and can cause operational faults.

The dishwasher must not be used if the electrical connection cable
is damaged. If the cable is damaged it must be replaced with a
special cable available from Miele. For safety reasons this must only
be done by the Miele Service Department or an authorised Miele
Service dealer.

The dishwasher must be disconnected from the mains electricity
supply before any maintenance or repair work is carried out.

The plastic housing of the water connection contains electrical
components. It must not be dipped in water.

There are electrical wires in the water inlet hose. Do not shorten
the water inlet hose, even if it is too long.
Warning and Safety instructions
11