Warning And Safety Instructions; Correct Installation; Technical Safety - Miele marine PG 8059 Operating Instructions Manual

Warning and Safety instructions

10

Correct installation


This dishwasher may only be installed and used in mobile
installations such as ships if a risk assessment of the installation has
been carried out by a suitably qualified engineer.

This dishwasher must be fixed in position when it is installed.
Failure to do this could result in personal injury, damage to the
machine and damage to property.

This dishwasher must be securely bolted to the floor using a BBF
80 kit.

Do not install this dishwasher in an area where there is a risk of
explosion or freezing conditions.

In order to reduce the risk of damage from condensation, the
furniture in the area around the dishwasher should be designed for
commercial use.

Technical safety


This dishwasher must only be installed, commissioned, repaired
and then maintained by the Miele Service Department or an
authorised Miele Service dealer. Installation, repair and other work by
unqualified persons could be dangerous and Miele will not be held
liable.

This dishwasher must only be operated by appropriately trained
personnel. They must be instructed and trained regularly.

Before using the dishwasher, check it for any externally visible
damage. Under no circumstances should you use it if it has been
damaged. It could be dangerous.

In the event of a damaged or leaking dishwasher, switch off at the
mains immediately and call the Miele Service Department or an
authorised Miele Service dealer.

Faulty components must only be replaced by genuine Miele
original spare parts. Only when these parts are fitted can Miele
guarantee the correct functioning and safety of the appliance.

The electrical safety of this dishwasher can only be guaranteed
when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt, please have the electrical
installation tested by a qualified electrician. Miele cannot be held
liable for the consequences of an inadequate earthing system (e.g.
electric shock).

Please follow the advice on installation in these instructions and
the separate Installation diagram.

Before connecting the appliance, ensure that the connection data
on the data plate (voltage, frequency and fuse rating) match the
mains electrical supply.