Factory Assembled Features; Connections And Service Access - Kohler K-1168 Installation Manual

Product Information (cont.)

Factory Assembled Features

Factory assembled components include a blower motor, air harness, control, check valve, butterfly valves,
chromatherapy lights (if provided), electrical harnesses, and an illuminated user keypad. Other than power
wiring and plumbing, no assembly is required.

Connections and Service Access

NOTICE: Provide unrestricted service access to the blower motor. You must provide access for servicing
the blower motor and controls. The access must be located immediately next to the blower motor. Study
the roughing-in information packed with the bath with airjets.
Before installation, ensure that there is proper access to the blower motor and final connections. If the blower
motor is installed in an enclosed area, an access panel is required at the blower motor. This panel should be
at least 34" (86.4 cm) wide and 15" (38.1 cm) high.
Kohler Co. 3 1035472-2-J