ProForm PFTL59420.0 User Manual page 11

6. Attach a Handrail (80) to the Right Upright (86)
with two 5/16" x 1 1/2" Screws (7) and two 5/16"
Star Washers (12) in the location shown; start
both Screws, and then tighten them. Make
sure not to pinch the Upright Wire (88), and
make sure that the wire is on the indicated
side of the Upright.
Attach the other Handrail (80) to the Left
Upright (85) in the same way. Note: There are
no wires on the left side.
Then, remove and discard the indicated
screws (F).
7. Set the console assembly (G) face down on
a soft surface to avoid scratching the console
assembly. Attach the Right and Left Trays
(99, 98) with six #8 x 1/2" Screws (5); start all
six Screws, and then tighten them. Do not
overtighten the Screws.
Then, remove and save the four 5/16" x 3/4"
Screws (24).
6
7
12
F
80
85
7
5
24
G
11
7
12
F
80
88
5
99
5
98
86
5
24