4. Set the Right Upright (86) on the Base (97) as
shown. Make sure not to pinch the Upright
Wire (88). Slide the Right Upright so that the
3/8" x 2 3/8" Screw (3) in the Base is inserted
into the slot (E) in the Right Upright; do not
fully tighten the Screw yet.
5. Attach the Right Upright (86) to the Base (97)
with a 3/8" x 2 3/8" Screw (3), a 3/8" x 1 1/4"
Screw (1), a 3/8" x 1 1/2" Screw (2), and three
3/8" Star Washers (11) as shown; do not fully
tighten the Screws yet.
Attach the Left Upright (not shown) as shown
in steps 4 and 5. Note: There are no wires on
the left side.
4
3
5
97
11
1
86
10
88
E
86
97
3
11
2
11