Pfaff tiptronic 6232 Instruction Manual page 38

34
·
-
.
Stitch width knob
The stitch width can be infinitely adjusted via
the knob (34). When selecting the width, the
needle must not be in the material.
Basic setting: Turn the stitch width knob (34)
to the symbol (maximum stitch width) .
Exception: Straight stitch is sewn with stitch
length O.
In chapter "Utility stitches and practical
sewing" (pages 33 - 58), you will find
recommendations in the tables for the stitch
width selection of individual stitches. During
sewing you can also change the stitch width.
Needle positioning knob
In the center needle position @ 14 additio-
nal needle positions can be selected by tur-
ning the needle positioning knob (35) in incre-
ments to the left or right . The furthest needle
position to the left
@:J
can be achieved by
turning the knob (35) as far as it will go to the
right. The furthest needle position to the
right
CQ)
can be achieved by turning the knob
as far as it will go to t he left. When the posi-
tion of the needle is being changed, the
needle must not be in the material.
Note:
If you have selected the needle position to the
right, you can now use the width knob (34) to
increase or reduce the width of the left side of
the stitch . The reverse applies also for needle
position to the left (see page 66).
31