Table of Contents
Advertisement
5. Select the Add Nametag screen button.
6. The system will say "Name please." State what
you would like to call the memory point.
7. The system will play back what was recorded
and then will ask you to confirm the nametag.
State "Yes" to confirm the nametag; state "No"
to cancel the nametag and to try again.
You can choose whether or not to have the name show
on the map screen, next to the POI icon, by selecting
the Show Name On or Off screen buttons.
Del Nametag (Delete): Once a nametag has been
added, the Add Nametag screen button will change
to Del Nametag.
To delete a nametag, press the Del Nametag screen
button. The nametag will be automatically deleted
from that memory point.
To modify the position of the stored point:
1. Select the Memory Points screen button from
the STORED LOCATIONS screen.
2. Select the folder/category the memory point
is stored in.
3. Select the Edit screen button.
4. Select the memory point from the list.
5. Select the Position screen button.
6. The system will display the map screen with the
destination marked. Touch the position on the
map to move the memory point to that location.
7. Select the OK screen button when the memory
point has been moved to the appropriate location.
8. The system will return to the EDIT MEMORY POINT
screen and will now display the new address,
longitude, and latitude for the memory point.
To change the icon associated with a memory point:
1. Select the Memory Points screen button from
the STORED LOCATIONS screen.
2. Select the folder/category the memory point
is stored in.
3. Select the Edit screen button.
4. Select the memory point from the list.
5. Select the Icon screen button.
6. Select the desired icon. There are two pages
of icons and a page of icons that have sounds
associated with them.
7. The new icon will be displayed in the EDIT
MEMORY POINT screen, next to the Icon
screen button on the map.
2-29
Advertisement
Table of Contents
