Table of Contents
Advertisement
3. When the screen displays "Insert Disc (number)",
insert the disc partway into the slot, label side up.
The system will pull it in and start playing. The
system will display the type of disc inserted,
B
DVD - Video,
Audio for CD/DTS, MP3 for
MP3 CDs, or DVD - Audio.
To load multiple discs, do the following:
1. Press and hold the load hard key.
2. When the screen displays "Insert Disc (number)",
load the disc partway into the slot, label side up.
The system will pull it in.
3. Once a CD is loaded, the system will display
"Insert Disc (number)" again. Load the next
disc. Repeat this procedure for each disc.
The player takes up to six disc(s), do not try to
load more than six. The system will not display
the disc types when loading all, until the discs
have been read by the system.
Once all discs have been inserted, the system
will start playing the last loaded disc.
3-14
If no CD or DVD is loaded in the CD/DVD changer
and you press the SRCE hard key a "No disc
loaded" error message will be displayed.
Select the Cancel screen button, when available,
to stop the loading process and to start playing the
last loaded disc.
Z
(Eject): To eject a disc, do the following:
1. Press the eject hard key.
2. Select the slot number, 1–6, to eject the disc.
3. The system will display "Ejecting Disc" and then
eject the disc.
If a selection is not made, the system will eject
the disc from the current slot. If the disc is
not removed from the slot, the system will pull it
back in after 10 seconds and start playing it.
To eject all discs at once, press and hold the eject
hard key. The system will display the disc number
being ejected.
Advertisement
Table of Contents
