Advanced Operation - RCA RP5012 User Manual

Advanced operation

CAUTION
EN
• The edit function does not operate
when battery power is too low.
• After editing a message, "WAIT" will
be displayed. Do not power off the
device until "WAIT" disappears.
Insert
You can insert new segments into a file
without erasing previously recorded
content.
1. Select folder.
2. Select file for inserting new
segment.
3. Start playback.
4. Press RECORD to
start recording new
segment, "INS" and
elapsed recorded time
will be shown on
display.
5. Press STOP to stop recording.
Append
You can add appendix (e.g.
reminder, supplementary
information) to the end of the file.
13
RP5010
1. Select folder.
2. Select file for adding appendix.
3. Start playback.
4. Press PLAY to
start playback.
5. During playback,
press MENU once,
"APPEND" will be
shown on display.
6. Press RECORD within 5 seconds to
start recoring appendix.
7. Press STOP to stop recording.
Cut
You can erase unwanted parts from
your recording.
1. Select folder.
2. Select file.
3. Start playback of the file with the
unwanted part.
4. Press ERASE to
mark the start of the
unwanted part, "CUT-
S" shows on display.
5. Press ERASE to
mark the endof the
unwanted part, "CUT-
E" shows on display.
6. Press ERASE agin
to confirm cutting (or
press STOP to cancel)
Tips: Cutting, inserting new segments
and adding appendix will only update
the recorded time length, without
changing recording time and date.
15 8/9/02, 6:01 PM