Recording Quality / Condition - RCA RP5012 User Manual

Recording quality / condition

Setting Recording
Quality
You can select between two recording
qualities. Default is SP.
Definition
• SP (Standard Play) - allows about 160
min recording on RP5010, 320 min on
RP5012.
• HQ (High Quality) - allows about 60
min recording on RP5010, 120 min on
RP5012.
1. Press MENU
button three times,
(SP or HQ show on
display.)
2. Toggle between
SP and HQ by
pressing REVERSE
or FORWARD.
3. Confirm selection
by pressing MENU
or STOP button.
RP5010
Setting Recording
Condition
You can select between two recording
conditions. Default is DICT.
Definition
• CONF (Conference) - in a more open
area and recording source is far from
the unit.
• DICT (Dictation) - in a more enclosed
area and recording source is close to
the unit.
1. Press MENU twice
until DICT or CONF
show on display.
2. Select recording
condition by
pressing REVERSE
or FORWARD.
3. Confirm selection
by pressing MENU
button. (You may
press STOP to exit
from further
selection.)
Tips:
• For conferences, to obtain optimum
recording quality, place the recorder with
the microphone freely exposed to the
sound source as close as convenient. A
built-in automatic recording level control
will set record level for optimum
recordings during manual recording. Avoid
recording near unwanted noise sources,
such as air conditioners or fans.
12
EN
10
8/9/02, 6:01 PM