Volvo V60 2019 Owner's Manual page 419

Symbols in the driver display
Symbol Specification
If the symbol flashes, it indicates a
fault has occurred. See the mes-
sage in the driver display.
Fault in brake system. See the
message in the driver display.
Information message in driver dis-
play.
Related information
Activating and deactivating the parking brake
•
(p. 414)
Parking on a hill (p. 416)
•
Starter battery (p. 592)
•
Volvo service programme (p. 578)
•
Automatic braking when stationary
Automatic brake when stationary (Auto hold)
means that the driver can release the brake
pedal while maintaining braking effect when the
car has stopped at traffic lights or a junction.
When the car has stopped, the brakes are acti-
vated automatically. The function can use either
foot brake or parking brake to hold the car sta-
tionary and it works on all gradients. When driving
away, the brakes disengage automatically if the
driver is wearing the seatbelt.
NOTE
When braking to a standstill on an uphill or
downhill slope, the brake pedal should be
depressed a little harder before being
released to ensure the car does not roll.
The parking brake is activated if
the car is switched off
•
the driver's door is opened
•
the driver's seatbelt is unbuckled
•
the car has been stationary for a longer time
•
(5-10 minutes).
STARTING AND DRIVING
Symbols in the driver display
Symbol Specification
The symbol is illuminated when the
function uses the foot brake to
keep the car stationary.
The symbol is illuminated when the
function uses the parking brake to
keep the car stationary.
Related information
Activating and deactivating the automatic
•
brake at a standstill (p. 418)
Foot brake (p. 411)
•
Parking brake (p. 414)
•
Help when starting on a hill (p. 418)
•
417