Volvo V60 2019 Owner's Manual page 411

Hide thumbs Also See for V60 2019:
Table of Contents

Advertisement

Level
Functions
II
The headlamps come on.
Warning/indicator lamps illuminate
for 5 seconds.
Several other systems are acti-
vated. However, heating in seat
cushions and the rear window can
only be activated after the car has
been started.
This ignition position consumes a
lot of current from the battery and
should therefore be avoided!
A
Also activated when the door is opened.
Related information
Starting the car (p. 406)
Adjusting the steering wheel (p. 195)
Using jump starting with another battery
(p. 454)
Selecting ignition mode (p. 409)
Selecting ignition mode
The car's electrical system can be set in different
levels/positions and in this way make the differ-
ent functions available.
Selecting ignition position
Start knob in the tunnel console.
Ignition position 0 – Unlock the car and
store the remote control key inside the car.
NOTE
To reach level I or II without starting the
engine - do not depress the brake pedal, or
the clutch pedal for cars with manual gear
changing, when these ignition positions are to
be selected.
STARTING AND DRIVING
Ignition position I – Turn the start knob
clockwise and release it. The control auto-
matically returns to its starting position.
Ignition position II – Turn the start knob
clockwise and hold it in position for
approx. 5 seconds. Then release the knob,
which automatically returns to its starting
position.
Back to ignition position 0 – To return to
ignition position 0 from position I and II –
Turn the start knob clockwise and release.
The control automatically returns to its star-
ting position.
Related information
Starting the car (p. 406)
Switching off the car (p. 407)
Ignition positions (p. 408)
Adjusting the steering wheel (p. 195)
Using jump starting with another battery
(p. 454)
409

Advertisement

Table of Contents
loading

Table of Contents